欢迎访问《日用化学工业(中英文)》,今天是

日用化学工业 ›› 2016, Vol. 46 ›› Issue (12): 697-702.doi: 10.13218/j.cnki.csdc.2016.12.005

• 开发与应用 • 上一篇    下一篇

湿法球磨改性蒙脱土及其稳定液体石蜡/水Pickering乳液的制备

颜慧琼1,陈秀琼1,宋煌旺1,李嘉诚2,王向辉1,林强1   

  1. 1.海南师范大学 化学与化工学院,海南 海口 571100;
    2.海南大学 材料与化工学院,海南 海口 570228
  • 出版日期:2016-12-22 发布日期:2019-04-18
  • 通讯作者: 林强,教授,博士生导师,电话:13807654689,E-mail:linqiang@hainu.edu.cn。
  • 作者简介:颜慧琼(1986-),男,湖北孝感人,博士研究生,电话:13976013807,E-mail:yanhqedu@163.com。
  • 基金资助:
    国家自然科学基金资助项目(21366010,21566009);海南省重点科技计划资助项目(ZDYF2016095)

Preparation of liquid paraffin/water Pickering emulsions stabilized by modified montmorillonite with wet ball mill method

YAN Hui-qiong1,CHEN Xiu-qiong1,SONG Huang-wang1,LI Jia-cheng2,WANG Xiang-hui1,LIN Qiang1   

  1. 1.College of Chemistry &Chemical Engineering,Hainan Normal University,Haikou,Hainan 571100,China;
    2.College of Materials &Chemical Engineering,Hainan University,Haikou,Hainan 570228,China
  • Online:2016-12-22 Published:2019-04-18

摘要: 以钠基蒙脱土(Na-MMT)为原料,采用湿法球磨法制备双十二烷基二甲基溴化铵(DDAB)插层的改性蒙脱土(DDA-MMT),并在超声作用下乳化液体石蜡制得O/W型Pickering乳液。通过XRD、TEM、FT-IR、接触角测量仪和Zeta电位及激光粒度仪对DDA-MMT进行了表征。考察了DDA-MMT颗粒质量浓度、水相pH和离子强度对Pickering乳液稳定性的影响。实验结果表明,在球磨机械力作用下DDAB成功插入Na-MMT的片层间,使Na-MMT的平均粒径、Zeta电位和三相接触角分别由910.7 nm,-26.8 mV和121.7°变为603.8 nm,38.3 mV和86.9°。与Na-MMT颗粒相比,DDA-MMT颗粒更容易在油/水界面间聚集而具有更好的乳化稳定性。随着DDA-MMT颗粒质量浓度的增大,Pickering 乳液液滴粒径减小,乳液体积分数增大,稳定性增强。当水相pH=6.26~8.36,c(NaCl)=20 mmol/L时,由DDA-MMT颗粒乳化制备的Pickering乳液稳定性较佳。

关键词: 钠基蒙脱土, 双十二烷基二甲基溴化铵, Pickering乳液, 稳定性

Abstract: Wet ball mill method was applied to prepare modified montmorillonite (DDA-MMT) by the intercalation of didodecyldimethylammonium bromide (DDAB) with Na-montmorillonite (Na-MMT) as the basic material.Then the resultant DDA-MMT was applied to emulsify liquid paraffin to form O/W Pickering emulsions under the action of ultrasound.The resultant DDA-MMT was characterized by XRD,TEM,FT-IR,contact angle measurement,Zeta potential and laser particle size analyzer.The effects of DDA-MMT mass concentration,pH of aqueous phase and ionic strength on the stability of the Pickering emulsions were also investigated.Experimental results showed that DDAB has successfully intercalated into the interlayer of Na-MMT under the mechanical action of the ball mill,causing the size,Zeta potential and three phase contact angle change from 910.7 nm,-26.8 mV and 121.7° to 603.8 nm,38.3 mV and 86.9° respectively.In comparison with Na-MMT particles,DDA-MMT particles are more easily to aggregate between the oil-water interfaces and displays better emulsification stability.With the increasing of DDA-MMT mass concentration,the particle size of the Pickering emulsions decreases,the volume fraction of the emulsion increases and the stability of the emulsion becomes better.When the pH of aqueous phase is in the range of 6.26~8.36,and the NaCl concentration is 20 mmol/L,the stability of the Pickering emulsion prepared by DDA-MMT is in the best condition.

Key words: Na-montmorillonite, didodecyldimethylammonium bromide, Pickering emulsion, stability

中图分类号: 

  • O648.2+3