欢迎访问《日用化学工业（中英文）》，今天是
日用化学工业（中英文）

日用化学工业 ›› 2014, Vol. 44 ›› Issue (6): 333-335.doi: 10.13218/j.cnki.csdc.2014.06.074

• 开发与应用 • 上一篇    下一篇

微波加热下多胺树脂催化合成乳酸丁酯

李善吉, 李文超, 曹庆翔, 张云霄   

  1. 嘉应学院 化学与环境学院,广东 梅州 514015
  • 收稿日期:2014-01-17 出版日期:2014-06-22 发布日期:2019-04-10
  • 作者简介:李善吉(1969-),男,湖南人,教授,博士,电话:15812936929。
  • 基金资助:
    广东省自然科学基金资助项目(10451401501004311)

Synthesis of butyl lactate using polyamine resin as catalyst under microwave heating

LI Shan-ji, LI Wen-chao, CAO Qing-xiang, ZHANG Yun-xiao   

  1. School of Chemistry and Environment,Jiaying University,Meizhou,Guangdong 514015,China
  • Received:2014-01-17 Online:2014-06-22 Published:2019-04-10

PDF (PC)

355

赞

摘要： 以聚氯乙烯-多乙烯多胺树脂(PVC-PP)作催化剂,用微波辐射加热,对乳酸和丁醇酯化反应进行了研究。讨论了微波辐射功率、辐射时间、原料配比、丁醇的化学结构及催化剂用量等对酯化反应的影响。结果表明,在正丁醇用量为0.24 mol,乳酸用量为0.08 mol,催化剂用量为0.5 g,微波功率为400 W,辐射时间为12 min的条件下,酯的产率可达96.5%。同时多胺树脂在使用5次后,酯的产率基本保持不变。

关键词: 乳酸丁酯, 多胺树脂, 微波加热, 催化

Abstract: Esterification of lactic acid and butyl alcohol was studied,in which polyvinyl chloride-polyethylene polyamine (PVC-PP) resin was used as catalyst and heating was conducted with microwave irradiation.The effects of microwave irradiation power,irradiation time,mole ratio of the starting materials,chemical structure of the butyl alcohol and dosage of the catalyst on the reaction were discussed.Results showed that the ester yield achieves 96.5% under conditions as amount of n-butyl alcohol 0.24 mol,amount of lactic acid 0.08 mol,dosage of the catalyst 0.5 g,power of the microwave 400 W and irradiation time 12 min.The catalyst can be used for five times without significant reduction of the product yield.

Key words: butyl lactate, polyamine resin, microwave heating, catalysis

中图分类号: 

  • TQ655