欢迎访问《日用化学工业（中英文）》，今天是
日用化学工业（中英文）

日用化学工业 ›› 2015, Vol. 45 ›› Issue (1): 28-31.doi: 10.13218/j.cnki.csdc.2015.01.007

• 开发与应用 • 上一篇    下一篇

乳状液在储层中的注入性研究

徐金涛, 岳湘安, 宋伟新, 张德鑫, 苏群, 刘凯   

  1. 中国石油大学(北京) 石油工程教育部重点实验室,北京 102249
  • 出版日期:2015-01-22 发布日期:2019-04-01
  • 作者简介:徐金涛(1989-),男,山东人,硕士研究生,电话:(010)89733961。

Study on injection of emulsions in reservoir bed

XU Jin-tao, YUE Xiang-an, SONG Wei-xin, ZHANG De-xin, SU Qun, LIU Kai   

  1. Key Laboratory of Petroleum Engineering,Ministry of Education,China University of Petroleum (Beijing),Beijing 102249,China
  • Online:2015-01-22 Published:2019-04-01

PDF (PC)

291

赞

摘要： 制备了一种稳定的水包油型乳状液体系,开展了此乳状液在30 cm长均质柱状岩芯的渗流实验,模拟乳状液在不同渗透率模拟储层中运移的过程。实验结果表明,平均粒径为3.673 μm的乳状液在渗透率0.6~1 μm2的岩芯中注入性和调驱能力都较好;当乳状液平均粒径与孔道平均直径的比值dr≤0.33时,乳状液的注入性较好,当dr>0.33时,随着dr的增大,乳状液的注入性迅速变差。

关键词: 乳状液, 注入性, 渗透率, 粒径匹配, 阻力系数

Abstract: A kind of stable O/W emulsion was prepared in the laboratory.Seepage experiments of this emulsion in homogeneous cylindrical core with the length of 30 cm were carried out to simulate the seepage process of emulsion in reservoir beds with separate permeability.The experimental results showed that the emulsion with particles of 3.673 μm average diameter can be injected into deep of the core.In the cores with permeability from 0.6 to 1 μm2,the emulsion has good property both in profile control and injection.When the ratio of average diameter of emulsion and average diameter of core is less than 0.33,the property of injection is well.When the ratio of average diameter of emulsion and average diameter of core is larger than 0.33,as the ratio increases,the property of injection decreases quickly.

Key words: emulsion, injection, permeability, particle size match, resistance coefficient

中图分类号: 

  • TQ423.92