两亲聚合物设计合成及其增效体系研究（XI）——两亲聚合物凝胶

doi:10.3969/j.issn.1001-1803.2020.11.002

日用化学工业 ›› 2020, Vol. 50 ›› Issue (11): 743-748.doi: 10.3969/j.issn.1001-1803.2020.11.002

两亲聚合物设计合成及其增效体系研究（XI）——两亲聚合物凝胶

杨红斌^1,²(),康万利^1,²(),李哲^1,²,Bauyrzhan Sarsenbekuly^1,²,蒋海壮^1,²,王嘉林^1,²

1.非常规油气开发教育部重点实验室（中国石油大学（华东））,山东青岛 266580
2.中国石油大学（华东）石油工程学院,山东青岛 266580

收稿日期:2020-10-30 出版日期:2020-11-22 发布日期:2020-11-20
通讯作者: 康万利
作者简介:杨红斌（1987-）,男,山东滨州人,讲师,硕士生导师,电话:18663938523,E-mail: hongbinyang@upc.edu.cn。
基金资助:
国家自然科学基金资助项目(51774309);山东省重点研发计划资助项目(2019GGX102074)

Study on the design and synthesis of amphiphilic polymers and their synergistic systems (XI) Amphiphilic-polymer gels

YANG Hong-bin^1,²(),KANG Wan-li^1,²(),LI Zhe^1,²,Bauyrzhan Sarsenbekuly^1,²,JIANG Hai-zhuang^1,²,WANG Jia-lin^1,²

1. Key Laboratory of Unconventional Oil & Gas Development （China University of Petroleum （East China））,Ministry of Education, Qingdao, Shandong 266580, China
2. School of Petroleum Engineering,China University of Petroleum （East China）, Qingdao, Shandong 266580, China

Received:2020-10-30 Online:2020-11-22 Published:2020-11-20
Contact: Wan-li KANG

摘要/Abstract

摘要：

在对两亲聚合物凝胶优势特点介绍的基础上,探讨了聚合物凝胶体系各构筑组分以及应用油藏环境等对两亲聚合物凝胶成胶性能的影响机制及影响规律。最后提出了两种两亲聚合物复合凝胶体系的构筑方法:无机颗粒增强型两亲聚合物复合凝胶和主客体包合型两亲聚合物复合凝胶,最后对两亲聚合物凝胶的发展趋势进行了展望,本文可为两亲聚合物凝胶的设计及应用提供理论和技术基础。

关键词: 两亲聚合物凝胶, 成胶性能, 影响因素, 复合凝胶

Abstract:

Based on the introduction of characteristics and advantages of amphiphilic-polymer gels, the influencing mechanism and influencing rules of the components of polymer gel system and the reservoir application environment on the gel performance of amphiphilic-polymer gels have been discussed. Two methods for constructing composite gels based on amphiphilic polymers have been studied, including the methods of “inorganic-particle-reinforced” type and of “host-guest inclusion” type. Then the development trend of amphiphilic-polymer gels has been prospected. This work can provide a theoretical and technical basis for the design and application of amphiphilic-polymer gels.

Key words: amphiphilic-polymer gels, gel performance, influencing factor, composite gel

中图分类号:

TQ423

杨红斌,康万利,李哲,Bauyrzhan Sarsenbekuly,蒋海壮,王嘉林. 两亲聚合物设计合成及其增效体系研究（XI）——两亲聚合物凝胶[J]. 日用化学工业, 2020, 50(11): 743-748.

YANG Hong-bin,KANG Wan-li,LI Zhe,Bauyrzhan Sarsenbekuly,JIANG Hai-zhuang,WANG Jia-lin. Study on the design and synthesis of amphiphilic polymers and their synergistic systems (XI) Amphiphilic-polymer gels[J]. China Surfactant Detergent & Cosmetics, 2020, 50(11): 743-748.

图/表 7

图 1

图 2

图 3

图 4

图 5

图 6

图 7

参考文献 31

[1]	Shen Pingping. Technical progress of enhanced oil recovery [M]. Beijing: Petroleum Industry Press, 2006.
[2]	Yuan Shiyi, Wang Qiang. New progress and prospect of oilfields development technologies in China[J]. Petroleum Exploration and Development, 2018,45(4): 657-668.
[3]	Bai Baojun, Zhou Jia, Yin Mingfei. A comprehensive review of polyacrylamide polymer gels for conformance control[J]. Petroleum Exploration and Development, 2015,42(4): 481-487.
[4]	Chen Zhe, Xu Peng. Laboratory evaluation of weak gel/precrosslinked particulate composite flooding technology[J]. Unconventional Oil & Gas, 2018,5(5): 58-61.
[5]	Liu Jingjing. Research and application of weak gel particle composite transfer technology in Wuqi Oilfiled[J]. Unconventional Oil & Gas, 2018,5(6): 76-79.
[6]	Wang Jian, Yuan Yingzhong, Luo Pingya, et al. Preparation of hydrophobically associating polymer/phenol/formaldehyde/sea water in-situ gelling fluid as profiling/water shutoff agent[J]. Oilfield Chemistry, 2005,22(2): 140-142.
[7]	Li Huabin, Zhao Huating, Zhao Puchun, et al. Laboratory study on hydrophobically associating polymer gelling fluid as profiling agent for high temperature and high salinity reservoirs in Zhongyuan[J]. Oilfield Chemistry, 2006,23(1): 50-53.
[8]	Chen Hong, Zhang Sanhui, Chu Yubao, et al. Preparation and use of hydrophobically associating polymer gelling fluid for water injectivity profile modification in high temperature and high salinity reservoirs[J]. Oilfield Chemistry, 2004,21(4): 343-346.
[9]	Guo Yongjun, Zhang Xinmin, Feng Rusen, et al. Laboratory study of heat resistant weak gel on hydrophobically associating polymer AP-P4[J]. Oilfield Chemistry, 2007,24(2): 344-346.
[10]	Zhu Haoping, Bai Baohong, Zhang Daofa, et al. Research on plugging water and profile control technology of Jurassic reservoir of early water break through in Jiyuan Oilfield[J]. Journal of Xi’an Shiyou University (Natural Science Edition), 2009,24(3): 35-37.
[11]	Yang Hongbin, Zhang Hongwen, Zheng Wangang, et al. Effect of hydrophobic group content on the properties of betaine-type binary amphiphilic polymer[J]. Journal of Molecular Liquids, 2020,311:113358. doi: 10.1016/j.molliq.2020.113358
[12]	Zhu Zhou, Kang Wanli, Yang Hongbin, et al. Study on salt thickening mechanism of the amphiphilic polymer with betaine zwitterionic group by β-cyclodextrin inclusion method[J]. Colloid and Polymer Science, 2017,295(10): 1887-1895. doi: 10.1007/s00396-017-4169-7
[13]	Zhu Zhou, Kang Wanli, Bauyrzhan S, et al. Preparation and solution performance for the amphiphilic polymers with different hydrophobic groups[J]. Journal of Applied Polymer Science, 2017,134(20): 44744.
[14]	Yang Hongbin, Iqbal M W, Lashari Z A, et al. Experimental research on amphiphilic polymer/organic chromium gel for high salinity reservoirs[J]. Journal of Colloids and Surfaces A, 2019,582:123900.
[15]	Sun Lin, Zhang Lan, Pu Wanfen, et al. Influencing factors for gelation performance of double tail hydrophobically associated polymer weak gels[J]. Modern Chemical Industry, 2016,36(11): 102-106.
[16]	Liu Hongbo, Wang Airong, Bai Liye, et al. Low toxicity of organic cross-linked polymer gel[J]. Applied Chemical Industry, 2010,39(1): 64-66.
[17]	Chen Sitong, Sun Yu. Research on heat resistance and salt tolerance weak gel system[J]. Contemporary Chemical Industry, 2015,44(7): 1509-1511.
[18]	Wu You, Ye Zhongbin, Zhang Zhi, et al. A study on crosslinked system of hydrophobic associated polymer (AP-P4)[J]. Henan Petroleum, 2005,19(5): 36-40.
[19]	He Qiping, Shi Leiting, Guo Zhidong, et al. Research on heat resistance and salt tolerance weak gel system[J]. Drilling & Production Technology, 2011,34(2): 79-82.
[20]	Kang Wanli, Wang Yinan, Meng Lingwei, et al. Formation and properties of hydrophobic associating amphiphilic polymer gel[J]. Polymer Materials Science and Engineering, 2011,27(2): 26-29.
[21]	Zhang Na. The relation of structure and property of hydrophobically associating relative permeability modifier[D]. Daqing: Northeast Petroleum University, 2013.
[22]	Zhang Xinmin, Guo Yongjun, Feng Rusen, et al. Study on the properties of low temperature crosslinking strong gel plugging agent for hydrophobically associating polymer with temperature and salt tolerance[J]. Journal of Oil and Gas Technology, 2008,30(2): 317-319.
[23]	Zhang Xin. Synjournal and gelling performance of a novel hydrophobic association copolymer[J]. Journal of Northeast Petroleum University, 2013,37(2): 124-128.
[24]	Kang Wanli, Cao Changxiao, Guo Shujun, et al. Mechanism of silica nanoparticles’ better thickening effect on amphiphilic polymers in high salinity conditions[J]. Journal of Molecular Liquids, 2019,277:254-260. doi: 10.1016/j.molliq.2018.12.092
[25]	Lashari Z A, Yang H B, Zhou Z, et al. Experimental research of high strength thermally stable organic composite polymer gel[J]. Journal of Molecular Liquids, 2018,263(4): 118-124. doi: 10.1016/j.molliq.2018.04.146
[26]	Zou Jian, Chen Lei, Liu Changlong. Unblocking mechanism of β-cyclodextrin on amphiphilic polymer pluggings[J]. Oilfield Chemistry, 2019,36(3): 440-443.
[27]	Ji Yanfeng. Construction of β-cyclodextrin inclusion amphiphilic polymer system and its oil displacement performance[D]. Qingdao: China University of Petroleum, 2015.
[28]	Lu Yao, Kang Wanli, Wu Hairong, et al. Viscosity modulation method of amphiphilic polymer/β-cyclodextrin inclusion system[J]. Polymer Materials Science & Engineering, 2016,32(12): 98-103.
[29]	Pu Wanfen, Yang Yang, Wei Bing, et al. Potential of a β-cyclodextrin/ adamantane modified copolymer in enhancing oil recovery through host-guest interactions[J]. Industrial & Engineering Chemistry Research, 2016,55(31): 8679-8689.
[30]	Kang Wanli, Zhang Hongwen, Lu Yao, et al. Study on the enhanced viscosity mechanism of the cyclodextrin polymer and betaine-type amphiphilic polymer inclusion complex[J]. Journal of Molecular Liquids, 2019,296:111792. doi: 10.1016/j.molliq.2019.111792
[31]	Zhang Hongwen, Yang Hongbin, Zhou Bobo, et al. Effects of cyclodextrin polymer on the gelation of amphiphilic polymer in inclusion complex[J]. Journal of Molecular Liquids, 2020,305:112850. doi: 10.1016/j.molliq.2020.112850

两亲聚合物设计合成及其增效体系研究（XI）——两亲聚合物凝胶

Study on the design and synthesis of amphiphilic polymers and their synergistic systems (XI) Amphiphilic-polymer gels

RichHTML

PDF (PC)

赞

可视化

摘要/Abstract

引用本文

使用本文

图/表 7

参考文献 31

相关文章 8

Metrics

本文评价

推荐阅读 10

[1]	安瑞,赵庆. 水溶液中三氯生的吸附研究进展[J]. 日用化学工业（中英文）, 2023, 53(8): 945-953.
[2]	窦欣. 凝胶软物质体系的超分子结构多样性分析[J]. 日用化学工业, 2022, 52(9): 945-950.
[3]	张倩洁,沈兴亮,张婉萍. 超细珍珠粉制备Pickering乳液的影响因素研究[J]. 日用化学工业, 2021, 51(1): 1-9.
[4]	康万利,王芳,杨红斌,朱彤宇,Bauyrzhan Sarsenbekuly. 两亲聚合物设计合成及其增效体系研究（VIII）—— 剪切降解与恢复特性[J]. 日用化学工业, 2020, 50(8): 516-522.
[5]	郭海燕, 姚晨之, 严方. 表面活性剂水溶液相行为研究进展[J]. 日用化学工业, 2018, 48(3): 172-177.
[6]	田永红, 郭奕光, 翟晓梅, 张婉萍. 非离子表面活性剂形成微乳体系的规律性研究[J]. 日用化学工业, 2015, 45(3): 137-142.
[7]	许东颖, 王婴, 孟巨光, 林韶彬. pH敏感魔芋葡甘聚糖复合凝胶的制备及其缓释性能研究[J]. 日用化学工业, 2014, 44(11): 631-634.
[8]	赵莉, 邓成龙, 徐宝财. 表面活性剂的性能与应用(Ⅹ)——表面活性剂的吸附作用及其应用[J]. 日用化学工业, 2014, 44(10): 550-554.