[1] |
Kuang Xiyu . Research on the gas channeling capacity of foam[D]. Chengdu: Southwest Petroleum University, 2013.
|
[2] |
Chang S H, Grigg R B. Effects of foam quality and flow rate on CO2-foam behavior at reservoir temperature and pressure [C] // SPE/DOE Improved Oil Recovery Symposium. Tulsa: Society of Petroleum Engineers, 1999.
|
[3] |
Casteel J F, Djabbarah N F . Sweep improvement in CO2 flooding by use of foaming agents[J]. SPE Reservoir Engineering, 1998,3(4):1186-1193.
|
[4] |
Conroy M W, Taylor J C, Farley J P , et al. Liquid drainage from high-expansion (HiEx) aqueous foams during and after filling of a container[J]. Colloids Surface A: Physicochemical Engineer Aspects, 2013,426:70-97.
|
[5] |
Xu Youhong . Analysis of factors influencing stability of water-based foam drilling fluid[D]. Chengdu: Southwest Petroleum University, 2017.
|
[6] |
Chen Yang, Zhang Xingrong, Shang Yanbo . Measurement techniques of foam performance and influence factors of foam stability[J]. China Mining Magazine, 2014,23(2):230-234.
|
[7] |
Wang J, Liu H Q, Ning Z F , et al. Experimental research and quantitative characterization of nitrogen foam blocking characteristics[J]. Energy Fuels, 2012,26(8):5152-5163.
|
[8] |
Dou Wei, Liu Shuang . Analysis on the stability of petroleum sulfonate emulsion based on multiple light scattering principle[J]. Contemporary Chemical Industry, 2016,45(6):1138-1140.
|
[9] |
Feng Jianguo, Zhang Xiaojun, He Yuwei , et al. Multiple light scattering technology and its application in study on pesticide formulation stability[J]. Pesticide Science and Administration, 2014,35(12):56-59.
|
[10] |
Li Zhe, Kang Wanli, Wu Hairong , et al. Research on stability of nano-TiO2 aqueous dispersion system based on multiple light scattering[J]. China Surfactant Detergent & Cosmetics, 2016,45(7):409-413.
|
[11] |
Li Z, Wu H R, Yang M , et al. Stability mechanism of O/W Pickering emulsions stabilized with regenerated cellulose[J]. Carbohydrate Polymers, 2018,181(1):224-233.
|
[12] |
Kang W L, Xu B, Wang Y J , et al. Stability mechanism of W/O curde oil emulsion stabilized by polymer and surfactant[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2011,384(1-3):555-560.
|
[13] |
Shi Yanli, Yu Qianyao . Progress in research work field with respect to physical stability of emulsion oil in water for pesticides[J]. China Surfactant Detergent & Cosmetics, 2016,46(3):173-177.
|
[14] |
Delgado-Sánchez C, Fierro V, Li S , et al. Stability analysis of tannin-based foams using multiple light-scattering measurements[J]. European Polymer Journal, 2017,87:300-318.
|
[15] |
Yin X, Kang W L, Song S Y , et al. Stabilization mechanism of CO2 foam reinforced by regenerated cellulose[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2018,555:754-764.
|
[16] |
Zhao Fulin. Principle of chemistry (Ⅱ)[M]. Dongying: University of Petroleum Press, 1999: 143-144.
|
[17] |
Li Zhaomin, Wang Peng, Li Songyan , et al. Advances of researches on improving the stability of CO2 foams by nanoparticles[J]. Journal of Southwest Petroleum University (Science & Technology Edition) , 2014,36(4):155-161.
|