质构分析应用于预交联体膨颗粒强度评价的研究

doi:10.13218/j.cnki.csdc.2016.07.009

摘要/Abstract

摘要： 基于调剖堵水产品与食品工业产品如明胶等的相似性,引入食品工业中性能定量评价中常用的质构评价方法,以体膨颗粒为例开展调剖堵水用化学剂质构仪定量强度评价探索。利用CT-3质构仪对4种具有不同膨胀倍数的体膨颗粒开展质构分析,在压缩模式下,获得第一循环硬度和硬度形变量等参数,获得强度顺序为TP-rq>TP-qhd>TP-ga>TP-sd,该结果与感官评价具有较好的一致性。重复实验表明压缩模式下体膨颗粒质构评价曲线具有峰型一致、重复性好、区分度高的特点,第一循环硬度可作为体膨颗粒强度评价的指标之一,可定量表征膨胀倍数与强度之间的关系,为现场应用提供定量依据。

关键词: 调剖堵水剂, 体膨颗粒, 强度评价方法, 质构评价

Abstract: Based upon similarity between characteristics of profile control and water plugging product and food industry product (such as gelatin),the texture analyzing method,which was conventionally used for product performance evaluation in food industry,was introduced to conduct the exploration for quantitative strength evaluation of profile control and water plugging agent.Texture analysis for 4 kinds of grain swelling profile agents with different swelling multiple was conducted using a CT-3 texture analyzer.Under compression mode,data for parameters such as hardness cycle 1 standing for strength and the deformation corresponding to the hardness et al.were obtained.The results showed that the sequence of strength data of the 4 kinds of profile control and water plugging agent is TP-rq＞TP-qhd＞TP-ga＞TP-sd.The results are rather well consistent with the results from sense organ evaluation.Repeated tests showed that under compression mode,the peak type in the grain swelling profile evaluation graph displays consistency good repeatability and discrimination.The hardness cycle 1 could be used as one of the critical indices for the evaluation of strength of the grain swelling profile agent;to quantitatively characterize the relationship between swelling multiples and the strength;and to provide a quantitative basis for application in crude oilfields.

Key words: profile control and water plugging agent, grain swelling profile agent, strength evaluation method, texture evaluation

中图分类号:

TE357

姚远,罗健辉,范洪富,王平美,高圣平,王贝贝,康涛. 质构分析应用于预交联体膨颗粒强度评价的研究[J]. 日用化学工业, 2016, 46(7): 404-408.

YAO Yuan,LUO Jian-hui,FAN Hong-fu,WANG Ping-mei,GAO Sheng-ping,WANG Bei-bei,KANG Tao. Study on application of grain swelling profile control and water plugging agent strength evaluation by texture analyzing method[J]. China Surfactant Detergent & Cosmetics, 2016, 46(7): 404-408.

参考文献

[1] 唐孝芬,刘玉章,刘戈辉,等.预交联凝胶颗粒调剖剂性能评价方法[J].石油钻采工艺,2004(4):72-75,85.
[2] 刘玉,郑延成,韩贺祥,等.羧基和磺基甜菜碱表面活性剂的合成与溶液性质研究[J].日用化学工业,2015,45(12):680-684.
[3] 朱海林,胡志勇,王建龙,等.系列羟基磺基甜菜碱表面活性剂的合成及胶束化行为研究[J].日用化学工业,2012,42(6):405-409.
[4] 朱沛沛,侯韬,雷杰,等.阳离子Gemini表面活性剂的合成及应用研究综述[J].中国洗涤用品工业,2013(5):60-65.
[5] 李爱芬,任晓霞,江凯亮,等.表面活性剂改善稠油油藏水驱开发效果实验研究:以东辛油田深层稠油油藏为例[J].油气地质与采收率,2014,21(2):18-21.
[6] 张旭东,葛青,李庆霞,等.一种含羟丙基的阳离子表面活性剂的流变性能[J].日用化学工业,2015,45(1):1-6.
[7] 唐孝芬,李红艳,刘玉章,等.交联聚合物冻胶调堵剂性能评价指标及方法[J].石油钻采工艺,2004(2):49-53,84.
[8] 付美龙,周玉霞,叶成.河南油田高温油藏梳形聚合物调剖性能评价[J].油田化学,2013(3):371-375.
[9] 马红卫,刘玉章,熊春明,等.柔性深部液流转向剂SR-3的力学性能[J].油田化学,2008(1):67-70.
[10] 王超群,李宜强,曲成永,等.有机凝胶调剖剂强度的剪切恢复性能研究[J].海洋石油,2010(4):65-69.
[11] 张立娟,岳湘安,丁名臣,等.冻胶溶液在多孔介质中成胶性能的影响因素分析[J].油田化学,2012(3):293-298.
[12] 刘玉章,熊春明,罗健辉,等.高含水油田深部液流转向技术研究[J].油田化学,2006(3):248-251.
[13] 马涛.双组分IPN蒙脱土复合吸水材料深部液流转向剂研究[D].北京:中国地质大学(北京),2009.
[14] SZCZESNIAK A S.Classification of textural characteristics [J].J Food Sci,1963,28(4):385-389.
[15] SZCZESNIAK A S.Objective measurements of food texture [J].J Food Sci,1963,28(4):410-420.
[16] FRIEDMAN H H,WHITNEY J E,SZCZESNIAK A S.The texturometer:A new instrument for objective texture measurement [J].J Food Sci,1963,28(4):390-396.
[17] AVACHAT A M,GUJAR K N,WAGH K V.Development and evaluation of tamarind seed xyloglucan-based mucoadhesive buccal films of rizatriptan benzoate [J].Carbohydrate Polymers,2013,91(2):537-542.
[18] PEH K K,WONG C F.Polymeric films as vehicle for buccal delivery:Swelling,mechanical,and bioadhesive properties [J].Journal of Pharmacy and Pharmaceutical Sciences,1999,2(2):53-61.
[19] KHAN T A,PEH K K,CH'NG H S.Mechanical,bioadhesive strength and biological evaluations of chitosan films for wound dressing [J].Journal of Pharmacy and Pharmaceutical Sciences,2000,3(3):303-311.
[20] SINGH K,SURI R,TIWARY A K,et al.Chitosan films:crosslinking with EDTA modifies physicochemical and mechanical properties [J].Journal of Materials Science:Materials in Medicine,2012,23(3):687-695.
[21] SUN X D,ARNTFIELD S D.Gelation properties of myofibrillar/pea protein mixtures induced by transglutaminase crosslinking [J].Food Hydrocolloids,2012,27(2):394-400.
[22] SAELEAW M,DUERRSCHMID K,SCHLEINING G.The effect of extrusion conditions on mechanical-sound and sensory evaluation of rye expanded snack [J].Journal of Food Engineering,2012,110(4):532-540.
[23] WU M Y,CHANG Y H,SHIAU S Y,et al.Rheology of fiber-enriched steamed bread:Stress relaxation and texture profile analysis [J].Journal of Food and Drug Analysis,2012,20(1):133-142.
[24] HU X,LI Y,HE X,et al.Structure-behavior-property relationship study of surfactants as foam stabilizers explored by experimental and molecular simulation approaches [J].Journal of Physical Chemistry B,2012,116(1):160-167.
[25] FARAHNAKY A,DADFAR S M M,SHAHBAZI M.Physical and mechanical properties of gelatin-clay nanocomposite [J].Journal of Food Engineering,2014,122:78-83.
[26] GIOVINO C,AYENSU I,TETTEH J,et al.An integrated buccal delivery system combining chitosan films impregnated with peptide loaded PEG-b-PLA nanoparticles [J].Colloids and Surfaces B:Biointerfaces,2013,112:9-15.
[27] HAJIZADEH S,XU C,KIRSEBOM H,et al.Cryogelation of molecularly imprinted nanoparticles:A macroporous structure as affinity chromato-graphy column for removal of beta-blockers from complex samples [J].Journal of Chromatography A,2013,1274:6-12.
[28] BOURNE M.Food texture and viscosity:Concept and measurement [M].Academic press,2002.